EVERFIT TECHNOLOGY CO., LTD.

One of leading stainless Steel Pipe Fittings Manufacturers for Your Industrial Vacuum Pumps

Everfit Technology CO., LTD. (EFT) is one of the stainless steel pipe fittings manufacturers based in Taiwan with over 36 years of experience. EFT provides 316, 316Ti stainless steel pipe fittings, pipe reducer, eccentric pipe reducer, vacuum pump, valve actuator - ISO, EN11435, DNV, TSSA CRN, BPE, 3-A SSI certified.

Home » Products »

Products

1. Diaphragm Valve
2. Actuator Diaphragm Valve
3. Tank Bottom Diaphragm Valve
4. The Original Seat Valves
5. The Original Double Seat Valve
6. The Original Manual Seat Valve
7. The Original Manual Double Seat Valve
8. The Original Manual Single Seat Valve
9. The Original Manual Tank Valve
10. The Original Tank Valve
11. S1 Actuator
12. S3 Actuator
13. S104 Actuator
14. S3 Actuator With Control Box + Butterfly valve
15. Butterfly Valve
16. Butterfly Valve Handles
17. Butterfly Valve Handles
18. Inch Size Weld Butterfly Valves
19. SMS Weld Butterfly Valves
20. DIN Weld Butterfly Valves
21. Inch Size Clamp Butterfly Valves
22. DIN Male Butterfly Valves
23. SMS Male Butterfly Valves
24. IDF Male Butterfly Valves

1.Diaphragm Valve

Diaphragm Valve

Designation

NO	DESIGNATION	QTY	MATERIAL
1	Diaphragm valve Body	1	SS316L
2	EPDM Seal	1	EPDM
3	Seat	1	SS304
4	Nut	1	ST
5	Screw Shaft Seat	1	SS304
6	Bonnet	1	SS304
7	PP Ring	1	PP
8	Hand Wheel	1	POM
9	Screw	1	SS304
10	Ring	1	SS304
11	Nut	1	SS304
12	Pin	1	SS304
13	Ring	4	SS304
14	Cover	1	PP

Technical Date

Max product pressure : 10bar.
Max temperature : 140°C(EPDM)
Min temperature :10°C

Finishes

Valve body surface finishes, internal finish (acc.to DIN 4768)

Ra<6.3 µm blasted internal /external
Ra<6.3 µm electropolished internal /external
Ra<0.8 µm mechanically polished internal • blasted external
Ra<0.8 µm electropolished internal /external
Ra<0.6 µm mechanically polished internal • blasted external
Ra<0.6 µm electropolished internal /external
Ra<0.4 µm mechanically polished internal,blasted external
Ra<0.4 µm electropolished internal /external
Ra<0.25 µm mechanically polished internal /external
Ra<0.25 µm electropolished internal /external

Specification

Size	ID mm	t mm	H/NC mm	L/Weld mm	L/Clamp mm
1/2"	9.5	1.65	75	83	108
3/4"	15.8	1.65	75	83	108
1"	22.1	1.65	116	120	145
1.5"	34.8	1.65	136	153	178

TAG: sanitary diaphragm valves ,

[Go to Top]

2.Actuator Diaphragm Valve

Actuator Diaphragm Valve

Designation

NO	DESIGNATION	QTY	MATERIAL
1	Diaphragm valve Body	1	SS316L
2	PTFE Seal	1	PTFE
3	EPDM Seal	1	EPDM
4	Seat	1	SS304
5	Bonnet	1	SS304
6	Bush	1	Cu
7	U Ring	1	NBR
8	Female	1	SS304
9	Pin	1	SS304
10	Piston	1	SS304
11	U Ring	1	NBR
12	Nut	1	SS304
13	Stem	1	SS304
14	Spring	3	SS304
15	Bush	1	Cu
16	Stem	1	SS304
17	Cover	1	SS304
18	Nut	1	SS304

Technical Date

EPDM Max product pressure : 10bar.
PTFE/EPDM Max product pressure : 6bar.
Max temperature : 150°C(EPDM)
Min temperature : 10°C

Finishes

Valve body surface finishes, internal finish (acc.to DIN 4768)

Ra<6.3 µm blasted internal /external
Ra<6.3 µm electropolished internal /external
Ra<0.8 µm mechanically polished internal • blasted external
Ra<0.8 µm electropolished internal /external
Ra<0.6 µm mechanically polished internal • blasted external
Ra<0.6 µm electropolished internal /external
Ra<0.4 µm mechanically polished internal,blasted external
Ra<0.4 µm electropolished internal /external
Ra<0.25 µm mechanically polished internal /external
Ra<0.25 µm electropolished internal /external

Specification

Size	L mm	L1 mm	ØD mm	H mm
1/2"	83	12.5	60	77
3/4"	83	12.5	60	100
1.0"	120	12.5	90	130
1.5"	153	12.5	114	168

TAG: sanitary diaphragm valves ,

[Go to Top]

3.Tank Bottom Diaphragm Valve

Tank Bottom Diaphragm Valve

Manual Tank Bottom Diaphragm Valve

Size	ØD mm	Ød mm	E mm	L mm	H mm
1"	120	25.4	58	52	115
1.5"	160	38.1	65	68	135

Pneumatic Tank Bottom Diaphragm Valve

Size	ØD mm	Ød mm	E mm	L mm	H mm
1"	120	25.4	58	52	143
1.5"	160	38.1	65	68	170

T Type Diaphragm Valve

Size	ØD mm	Ød mm
1"x1/2"	25.4	12.7
1"x3/4"	25.4	19.05
1"x1"	25.4	25.4
1.5"x1/2"	38.1	12.7
1.5"x3/4"	38.1	19.05
1.5"x1"	38.1	25.4
1.5"x1.5"	38.1	38.1

TAG: sanitary diaphragm valves ,

[Go to Top]

4.The Original Seat Valves

The Original Seat Valves The Original Seat Valves

The Original Seat Valves

Caution, opening/closing time:

Opening/closing time will be effected by the following:
The air supply(air pressure).
The length and dimensions of the air hose.
Number of valves connected to same air hose.
Use of single solenoid valve for serial connected air
actuator functions.
Product pressure.

Air connections

Compressed air: R1/8"(BSP), internal thread.

Designation

NO	PART NAME	QTY	MATERIAL
1	Piston	1	SS304
2	Cyinder	1	SS304
3	Spring assembly	1	SS304
4	O-ring	1	NBR
5	O-ring	1	NBR
6	Bracket	1	SS304
7	O-ring	1	NBR
8	O-ring	1	NBR
9	Lock wire clip	1	SS304
10	Stop ring	1	PE
11	Clip complete	1	SS420
12	Stem	1	SS316L
13	Seal ring	1	EPDM
14	Washer	1	SS316L
15	O-ring	1	O-ring
16	Screws	1	SS316L
17	Lipseal-EPDM	1	EPDM
18	Valve body-lower	1	SS316L
19	Clamp	1	SS 304
20	Air connection	1	Cupper
21	Air outlet filter	1	Cupper

Technical Date

Max. product pressure (depending on valve specifications): 1000kpa(10 bar)
Min. product pressure: full vacuum.
Temperature range: 10°C to +140°C(EPDM)
Air pressure: 5 to 7 bar.

Materials

Product wetted steel parts: Steel AISI 316L.
Finish: Semi bright.
Other steel parts: Stainless steel AISI 304.
Plug stem : AISI 316L with hard chrome planted stemm surface.
Product wetted seals: EPDM rubber.
Other seals: NBR.

Ordering

Please state the following when ordering:

Size.
Connections if not welding ends.
Valve body combination.
Actuator function, NC, NO, or A/A.
Options.

Specification

Size	ID mm	OD mm	A0 mm	A1 mm	ØD mm	E1 mm	E2 mm	t mm	L/Clamp mm	L/SMS Male mm	L/IDF Male mm	L/RJT Male mm
25.4	22.1	25.4	202	14	60	50.5	38	1.65	21.5	19	21.5	21.5
38.1	34.7	38.1	287	25	87	60	68.5	1.65	21.5	23	21.5	21.5
50.8	47.5	50.8	361	25	87	68.5	68.5	1.65	21.5	23	21.5	21.5
63.5	60.2	63.5	385	25	87	79	82	1.65	21.5	27	21.5	21.5
76.1	72.9	76.1	453	32	133	103.5	103.5	1.65	21.5	27	21.5	21.5
101.6	97.6	101.6	481	32	133	103.5	103.5	2	21.5	30	30	30

[Go to Top]

5.The Original Double Seat Valve

The Original Double Seat Valve The Original Double Seat Valve

The Original Double Seat Valve

Caution, opening/closing time:

Opening/closing time will be effected by the following:
The air supply(air pressure).
The length and dimensions of the air hose.
Number of valves connected to same air hose.
Use of single solenoid valve for serial connected air
actuator functions.
Product pressure.

Air connections

Compressed air: R1/8"(BSP), internal thread.

Designation

NO	PART NAME	QTY	MATERIAL
1	Piston	1	SUS 304
2	Cyinder	1	SUS 304
3	Spring assembly	1	SUS304
4	O-ring	1	NBR
5	O-ring	1	NBR
6	Bracket	1	SUSB04
7	O-ring	1	NBR
8	O-ring	1	NBR
9	Lock wire clip	1	SUS 304
10	Stop ring	1	PE
11	Clip complete	1	SUS 420
12	Stem	1	SUS 316
13	Seal ring	2	EPDM
14	Middle piece	1	SUS 316
15	Washer	1	SUS 316
16	O-ring	1	O-ring
17	Screws	1	SUS316
18	Lip seal-EPDM	1	EPDM
19	Valve body-upper	1	SUS 316
20	Valve body-lower	1	SUS 316
21	Valve body seal ring	1	EPDM
22	Clamp	2	SUS 304
23	Air connection	1	Cupper
24	Air outlet filter	1	Cupper

Technical Date

Max. product pressure (depending on valve specifications): 1000kpa(10 bar)
Min. product pressure: full vacuum.
Temperature range: 10°C to +140°C(EPDM)
Air pressure: 5 to 7 bar.

Materials

Product wetted steel parts: Steel AISI 316L.
Finish: Semi bright.
Other steel parts: Stainless steel AISI 304.
Plug stem : AISI 316L with hard chrome planted stemm surface.
Product wetted seals: EPDM rubber.
Other seals: NBR.

Ordering

Please state the following when ordering:

Size.
Connections if not welding ends.
Valve body combination.
Actuator function, NC, NO, or A/A.
Options.

Specification

Size	ID mm	OD mm	A0 mm	A1 mm	A2 mm	ØD mm	C mm	E1 mm	E2 mm	t mm	L/Clamp mm	L/SMS Male mm	L/IDF Male mm	L/RJT Male mm
25.4	22.1	25.4	202	14	258	60	55.6	50.5	38	1.65	21.5	19	21.5	21.5
38.1	34.7	38.1	287	25	426	87	80	60	68.5	1.65	21.5	23	21.5	21.5
50.8	47.5	50.8	361	25	454	87	92	68.5	68.5	1.65	21.5	23	21.5	21.5
63.5	60.2	63.5	385	25	493	87	108	79	82	1.65	21.5	27	21.5	21.5
76.1	72.9	76.1	453	32	581	133	128	103.5	103.5	1.65	21.5	27	21.5	21.5
101.6	97.6	101.6	481	32	630	133	148	103.5	103.5	2	21.5	30	30	30

[Go to Top]

6.The Original Manual Seat Valve

The Original Manual Seat Valve

Technical Date

Max product pressure: 1000kpa(10bar).
Min product pressure: Full vacuum.
Temperature range: -10°C to +140°C(EPDM).

Materials

Product wetted steel parts: AISI 316L
Other steel parts: AISI 304
Plug stem: AISI 316L with chromium plated surface
Product wetted seals: EPDM
Other seals: NBR and FPM
Finish: Semi bright

Options

Equipment
Male parts or clamp liners in accordance with required standard.
Stainless steel disc replacing standard lip seal.

Materials Grades

Product wetted seals and lip seal of NBR, Fluorinated rubber(FPM) or PTFE.

Ordering

Please state the following when ordering:

Connections if not welding ends.
Size.
Valve body combination.
Options.

Specification

Size	ID mm	OD mm	A0 mm	A1 mm	B mm	E1 mm	E2 mm	t mm	L/Clamp mm	L/SMS Male mm	L/IDF Male mm	L/RJT Male mm
25.4	22.1	25.4	147	15	35	50.5	38	1.65	21.5	19	21.5	21.5
38.1	34.7	38.1	241	25	80	60	68.5	1.65	21.5	23	21.5	21.5
50.8	47.5	50.8	256	25	80	68.5	68.5	1.65	21.5	23	21.5	21.5
63.5	60.2	63.5	297	25	80	79	82	1.65	21.5	27	21.5	21.5
76.1	72.9	76.1	326	32	80	103.5	103.5	1.65	21.5	27	21.5	21.5
101.6	97.6	101.6	336.5	32	80	103.5	103.5	2	21.5	30	30	30

[Go to Top]

7.The Original Manual Double Seat Valve

The Original Manual Double Seat Valve

Technical Date

Max product pressure: 1000kpa(10bar).
Min product pressure: Full vacuum.
Temperature range: -10°C to +140°C(EPDM).

Materials

Product wetted steel parts: AISI 316L
Other steel parts: AISI 304
Plug stem: AISI 316L with chromium plated surface
Product wetted seals: EPDM
Other seals: NBR and FPM
Finish: Semi bright

Options

Equipment
Male parts or clamp liners in accordance with required standard.
Stainless steel disc replacing standard lip seal.

Materials Grades

Product wetted seals and lip seal of NBR, Fluorinated rubber(FPM) or PTFE.

Ordering

Please state the following when ordering:

Connections if not welding ends.
Size.
Valve body combination.
Options.

Specification

Size	ID mm	OD mm	A0 mm	A1 mm	B mm	C mm	E1 mm	E2 mm	t mm	L/Clamp mm	L/SMS Male mm	L/IDF Male mm	L/RJT Male mm
25.4	22.1	25.4	202	15	35	55.6	50.5	38	1.65	21.5	19	21.5	21.5
38.1	34.7	38.1	321	25	80	80	60	68.5	1.65	21.5	23	21.5	21.5
50.8	47.5	50.8	348	25	80	92	68.5	68.5	1.65	21.5	23	21.5	21.5
63.5	60.2	63.5	404	25	80	108	79	82	1.65	21.5	27	21.5	21.5
76.1	72.9	76.1	453	32	80	128	103.5	103.5	1.65	21.5	27	21.5	21.5
101.6	97.6	101.6	453	32	80	148	103.5	103.5	2	21.5	30	30	30

[Go to Top]

8.The Original Manual Single Seat Valve

The Original Manual Single Seat Valve The Original Manual Single Seat Valve

The Original Manual Single Seat Valve

Technical Date

Max product pressure: 1000kpa(10bar).
Min product pressure: Full vacuum.
Temperature range: -10°C to +140°C(EPDM).

Materials

Product wetted steel parts: AISI 316L
Other steel parts: AISI 304
Plug stem: AISI 316L with chromium plated surface
Product wetted seals: EPDM
Other seals: NBR and FPM
Finish: Semi bright

Options

Equipment
Male parts or clamp liners in accordance with required standard.
Stainless steel disc replacing standard lip seal.

Materials Grades

Product wetted seals and lip seal of NBR, Fluorinated rubber(FPM) or PTFE.

Ordering

Please state the following when ordering:

Connections if not welding ends.
Size.
Valve body combination.
Options.

Specification

Size	ID mm	OD mm	A0 mm	A1 mm	B mm	E1 mm	E2 mm	t mm	L/Clamp mm	L/SMS Male mm	L/IDF Male mm	L/RJT Male mm
25.4	22.1	25.4	147	15	35	50.5	38	1.65	21.5	19	21.5	21.5
38.1	34.7	38.1	241	25	80	60	68.5	1.65	21.5	23	21.5	21.5
50.8	47.5	50.8	256	25	80	68.5	68.5	1.65	21.5	23	21.5	21.5
63.5	60.2	63.5	297	25	80	79	82	1.65	21.5	27	21.5	21.5
76.1	72.9	76.1	326	32	80	103.5	103.5	1.65	21.5	27	21.5	21.5
101.6	97.6	101.6	336.5	32	80	103.5	103.5	2	21.5	30	30	30

[Go to Top]

9.The Original Manual Tank Valve

The Original Manual Tank Valve The Original Manual Tank Valve

Technical Date

Max product pressure: 1000kpa(10bar).
Min product pressure: Full vacuum.
Temperature range: -10°C to +140°C(EPDM).

Materials

Product wetted steel parts: AISI 316L
Other steel parts: AISI 304
Plug stem: AISI 316L with chromium plated surface
Product wetted seals: EPDM
Other seals: NBR and FPM
Finish: Semi bright

Specification

Size	ID mm	A0 mm	ØA mm	B mm	C mm	D mm	E mm	F mm	t mm
25.4	22.1	272	100	18	10	65	72	80	1.65
38.1	34.7	290	140	20	12	92	88	80	1.65
50.8	47.5	290	150	23	14	108	106	80	1.65
63.5	60.2	345	180	24	14	125	123	80	1.65
76.1	72.9	355	200	24	14	149	134	80	1.65

[Go to Top]

10.The Original Tank Valve

The Original Tank Valve The Original Tank Valve

Technical Date

Max product pressure: 1000kpa(10bar).
Min product pressure: Full vacuum.
Temperature range: -10°C to +140°C(EPDM).

Materials

Product wetted steel parts: AISI 316L
Other steel parts: AISI 304
Plug stem: AISI 316L with chromium plated surface
Product wetted seals: EPDM
Other seals: NBR and FPM
Finish: Semi bright

Specification

Size	ID mm	A0 mm	A1 mm	ØA mm	B mm	C mm	D mm	E mm	t mm
25.4	22.1	272	30	100	18	10	65	72	1.65
38.1	34.7	290	20	140	20	12	92	88	1.65
50.8	47.5	290	20	150	23	14	108	106	1.65
63.5	60.2	345	20	180	24	14	125	123	1.65
76.1	72.9	355	40	200	24	14	149	134	1.65

[Go to Top]

11.S1 Actuator

AIR /SPRING ACTUATOR SIMPLE OR DOUBLE EFFECT
FOR Ø25 (1") TO Ø76 (3") Butterfly Valve

SHUT-OFF TIME : 1.5 SECOND
WEIGHT : 3.7KG
POWER : 4M/KG AT 5 BAR COMPESSED AIR.
Max. torque 20N/m
CONSUMPTION : 0.266 LITER AT 5 BAR
MATERIAL : STAINLESS STEEL AISI 304.

Designation

NO	DESIGNATION	QTY	MATERIAL
1	Inox cylinder	1	SS304
2	Pistion	1	POM
3	Coupling axle piece	1	SS304
4	Lower cylinder end	1	SS304
5	Mounting C type spring	1	S/S
6	Circlip	1	SS304
7	Teflon contact seal		TELFON
8	SS304 ring	1	SS304
9	Pistion X-ring	1	NBR
10	Lower cylinder O-ring	1	NBR
11	Mounting bracket	1	SS304
12	Compressor! spring	6	S/S
13	M8*16 stainless steel screw	2	S/S
14	M6*30 stainless steel screw	2	S/S
15	M6 stainless steel nylon nut	2	S/S
16	Plastic positioning ring	1	Plastic
17	Pistion axle O-ring	1	NBR
18	Air connection	1	Cu
19	Air outlet filter	1	Cu

Actuator Date

S1/S3 : Shut-off time : 1.5 second / Weight : S1:3.7KGS / S3:4.2KGS.
S104 : Shut-off time : 1.7 second / Weight : 7.1KGS.

Technical Date

Max. air pressure : 7bar(700kPa).
Min. air pressure, NC and NO : 5bar(500kPa)
Temperature range : -25°C to +90°C.
Air consumption (litres free air) S1/S3 0.24*P(bar).
Air consumption (litres free air) S104 0.55*P(bar).
Signal transfer : S1/S104 can be connect with M12
screw proximity switch (PNP or NPN)
Signal transfer : S3 can be connect with M12
screw proximity switch(PNP or NPN) or control box.

Materials

Actuator body : Stainless steel AISI 304.
Piston : POM.
Seal : NBR.

Specification

Size	For butterfly valve	D	L
S1	1"-3" Dn25-76	85	205
S3	1"-3" Dn25-76	85	274
S104	4" Dn104	120	250

[Go to Top]

12.S3 Actuator

AIR /SPRING ACTUATOR SIMPLE OR DOUBLE EFFECT
FOR Ø25 (1") TO Ø76 (3") Butterfly Valve

SHUT-OFF TIME : 1.5 SECOND
WEIGHT : 3.7KG
POWER : 4M/KG AT 5 BAR COMPESSED AIR.
Max. torque 20N/m
CONSUMPTION : 0.266 LITER AT 5 BAR
MATERIAL : STAINLESS STEEL AISI 304.
COVER : PLASTIC.

Designation

NO	DESIGNATION	QTY	MATERIAL
1	Inox cylinder	1	SS304
2	Pistion	1	POM
3	Coupling axle piece	1	SS304
4	Lower cylinder end	1	SS304
5	Mounting C type spring	1	S/S
6	Circlip	1	SS304
7	Teflon contact seal	3	TELFON
8	SS304 ring	1	SS304
9	Pistion X-ring	1	NBR
10	Lower cylinder O-ring	1	NBR
11	Mounting bracket	1	SS304
12	Compressor! spring	6	S/S
13	M8*16 stainless steel screw	2	S/S
14	M6*30 stainless steel screw	2	S/S
15	M6 stainless steel nylon nut	2	S/S
16	Plastic positioning ring	1	Plastic
17	Pistion axle O-ring	1	NBR
18	Air connection	1	Cu
19	Air outlet filter	1	Cu
20	Pistion Stem O-RING	1	NBR
21	Pistion Stem	1	SS304
22	Stem Plastic Cover	1	Plastic
23	Plastic Cover	1	Plastic

Actuator Date

S1/S3 : Shut-off time : 1.5 second / Weight : S1:3.7KGS / S3:4.2KGS.
S104 : Shut-off time : 1.7 second / Weight : 7.1KGS.

Technical Date

Max. air pressure : 7bar(700kPa).
Min. air pressure, NC and NO : 5bar(500kPa)
Temperature range : -25°C to +90°C.
Air consumption (litres free air) S1/S3 0.24*P(bar).
Air consumption (litres free air) S104 0.55*P(bar).
Signal transfer : S1/S104 can be connect with M12
screw proximity switch (PNP or NPN)
Signal transfer : S3 can be connect with M12
screw proximity switch(PNP or NPN) or control box.

Materials

Actuator body : Stainless steel AISI 304.
Piston : POM.
Seal : NBR.

Specification

Size	For butterfly valve	D	L
S1	1"-3" Dn25-76	85	205
S3	1"-3" Dn25-76	85	274
S104	4" Dn104	120	250

[Go to Top]

13.S104 Actuator

AIR ACTUATOR SIMPLE OR DOUBLE EFFECT
FOR BUTTERFLY VALVE Ø85 TO Ø150 AND FULL

FLOW BALL VALVE DN50 TO DN80
SHUT-OFF TIME : 1.7 SECOND
WEIGHT : 7.1KG
POWER : AIR ACTUATOR 5 BAR MINI
SIMPLE EFFECT 11.5M DA N.

DOUBLE EFFECT 14M DA N.
CONSUMPTION : 0,550 LITRE AT 5 BAR
Max. torque 30N/m
MATERIAL : STAINLESS STEEL AISI 304.

Designation

NO	DESIGNATION	QTY
1	Cylinder	1
2	Piston	1
2-1	Aluminium Piston	1
3	Coupling axle piece	1
4	Lower cylinder	1
5	Mounting C type spring	1
6	Circlip	1
7	Teflon contact seal	3
8	SS304 Ring	1
9	Piston X-ring	1
10	Lower cylinder seal	1
11	Mounting bracket	1
12	Compressor! spring	6
12-1	Compressor! spring	1
13	M8*16 Screw	2
14	M6*45 Screw	2
15	M6 Ring	4
16	M6 nut	2
17	Connecting piece	1
18	Alxe piston seal	1
19	Air outlet filter	1
20	Air Connection 1/8 Gas	1
21	Piston stem screw	1
22	Piston stem nut	1
23	Positionning piece	1

Actuator Date

S1/S3 : Shut-off time : 1.5 second / Weight : S1:3.7KGS / S3:4.2KGS.
S104 : Shut-off time : 1.7 second / Weight : 7.1KGS.

Technical Date

Max. air pressure : 7bar(700kPa).
Min. air pressure, NC and NO : 5bar(500kPa)
Temperature range : -25°C to +90°C.
Air consumption (litres free air) S1/S3 0.24*P(bar).
Air consumption (litres free air) S104 0.55*P(bar).
Signal transfer : S1/S104 can be connect with M12
screw proximity switch (PNP or NPN)
Signal transfer : S3 can be connect with M12
screw proximity switch(PNP or NPN) or control box.

Materials

Actuator body : Stainless steel AISI 304.
Piston : POM.
Seal : NBR.

Specification

Size	For butterfly valve	D	L
S1	1"-3" Dn25-76	85	205
S3	1"-3" Dn25-76	85	274
S104	4" Dn104	120	250

[Go to Top]

14.S3 Actuator With Control Box + Butterfly valve

S3 Actuator With Control Box + Butterfly valve S3 Actuator With Control Box + Butterfly valve

AIR /SPRING ACTUATOR SIMPLE OR DOUBLE EFFECT
FOR Ø25 (1") TO Ø76 (3") Butterfly Valve

SHUT-OFF TIME : 1.5 SECOND
WEIGHT : 3.7KG
POWER : 4M/KG AT 5 BAR COMPESSED AIR.
Max. torque 20N/m
CONSUMPTION : 0.266 LITER AT 5 BAR
MATERIAL : STAINLESS STEEL AISI 304.
COVER : PLASTIC.

Specification

Size	A In	B In	D In	L In
1"	0.87	1.984	1.75	14.04
1-1/2"	1.37	1.984	1.75	14.19
2"	1.87	2.527	1.87	14.57
2-1/2"	2.37	3.047	1.91	14.7
3"	2.84	3.579	2.03	14.49

[Go to Top]

15.Butterfly Valve

Designation

NO	DESIGNATION	MATERIAL
1	Body	SS304/316L
2	Disc	SSB04/316L
3	Seal	EPDM/SILICON/VITON
4	Notch plate	SSB04
5	Screw	SS304
6	Girpper bar	SS304
7	Handle	Nylon
8	Spring	SS304
9	Pin	SS304
10	Seal	EPDM

Technical Date

Max. product pressure : 10bar
Min. product pressure : Full vacuum.
Temperature range : -10° to +95°C

Materials

Product wetted steel parts : AISI304 OR AISI316L.
Finish : Semi-bright.
Other steel parts : AISI 304.
Rubber gardes : Silicon rubber, EPDM or VITON.

Ordering

Please state the following when odering:
- Valve type.
- Valve size.
- Connections. if not welding ends.
- Materials : AISI304 or AISI 316L.
- Rubber garde : EPDM, Silicone, or Viton
- Type of handle, if required.

Specification

Torque for Open/Close
(for rotating the valve disc in a dry seal ring)

Size	Max.Nm
1"/ DN25	15
1.5"/ DNB8	15
2"/ DN51	20
2.5" DN63.5	25
3"/ DN76	30
4"/ DN104	35
6"	45

[Go to Top]

16.Butterfly Valve Handles

Butterfly Valve Handles Butterfly Valve Handles

Materials

Handle : Nylon 6+30% glass fiber or AISI 304
Gripper bar : AISI 304
Notch : AISI 304

Ordering

Please state the following when odering:
- Valve type.
- Valve size.
- Connections. if not welding ends.
- Materials : AISI304 or AISI 316L.
- Rubber garde : EPDM, Silicone, or Viton
- Type of handle, if required.

[Go to Top]

17.Butterfly Valve Handles

Materials

Handle : Stainless steel 304 with knob.

Ordering

Please state the following when odering:
- Valve type.
- Valve size.
- Connections. if not welding ends.
- Materials : AISI304 or AISI 316L.
- Rubber garde : EPDM, Silicone, or Viton
- Type of handle, if required.

[Go to Top]

18.Inch Size Weld Butterfly Valves

Inch Size Weld Butterfly Valves

Technical Date

Max. product pressure : 10bar
Min. product pressure : Full vacuum.
Temperature range : -10° to +95°C

Materials

Product wetted steel parts : AISI304 OR AISI316L.
Finish : Semi-bright.
Other steel parts : AISI 304.
Rubber gardes : Silicon rubber, EPDM or VITON.

Ordering

Please state the following when odering:
- Valve type.
- Valve size.
- Connections. if not welding ends.
- Materials : AISI304 or AISI 316L.
- Rubber garde : EPDM, Silicone, or Viton
- Type of handle, if required.

Specification

Inch Size Weld Butterfly Valves

Size	ID mm	OD mm	L mm	H mm
1.0"	22.1	25.4	52	61
1.5"	34.8	38.1	52	64.3
2.0"	47.5	50.8	54	74.3
2.5"	60.2	63.5	56	77.6
3.0"	72.9	76.2	60	84.8
4.0"	97.6	101.6	72	101.6
6.0"	146.4	152.4	100	133.5

[Go to Top]

19.SMS Weld Butterfly Valves

SMS Weld Butterfly Valves

Technical Date

Max. product pressure : 10bar
Min. product pressure : Full vacuum.
Temperature range : -10° to +95°C

Materials

Product wetted steel parts : AISI304 OR AISI316L.
Finish : Semi-bright.
Other steel parts : AISI 304.
Rubber gardes : Silicon rubber, EPDM or VITON.

Ordering

Please state the following when odering:
- Valve type.
- Valve size.
- Connections. if not welding ends.
- Materials : AISI304 or AISI 316L.
- Rubber garde : EPDM, Silicone, or Viton
- Type of handle, if required.

Specification

SMS Weld Butterfly Valves

Size	ID mm	OD mm	L mm	H mm
DN25	22.5	25	68	61
DN38	35.4	38	76	64.3
DN51	48	51	80	74.3
DN63	60.2	63.5	80	77.6
DN76	72.1	76.1	82	84.8
DN104	100	104	88	101.6

[Go to Top]

20.DIN Weld Butterfly Valves

DIN Weld Butterfly Valves

Technical Date

Max. product pressure : 10bar
Min. product pressure : Full vacuum.
Temperature range : -10° to +95°C

Materials

Product wetted steel parts : AISI304 OR AISI316L.
Finish : Semi-bright.
Other steel parts : AISI 304.
Rubber gardes : Silicon rubber, EPDM or VITON.

Ordering

Please state the following when odering:
- Valve type.
- Valve size.
- Connections. if not welding ends.
- Materials : AISI304 or AISI 316L.
- Rubber garde : EPDM, Silicone, or Viton
- Type of handle, if required.

Specification

DIN Weld Butterfly Valves

Size	ID mm	OD mm	L mm	H mm
DN15	16	19	60	52
DN20	19	23	64	61
DN28	25	28	68	61
DN34	31	34	76	64.3
DN40	37	40	76	74.3
DN52	49	52	80	77.6
DN70	66	70	82	84.8
DN85	81	85	84	91.6
DN104	100	104	88	101.6
DN125	125	132	120	116.2
DN150	150	157	124	131.1

[Go to Top]

21.Inch Size Clamp Butterfly Valves

Inch Size Clamp Butterfly Valves

Technical Date

Max. product pressure : 10bar
Min. product pressure : Full vacuum.
Temperature range : -10° to +95°C

Materials

Product wetted steel parts : AISI304 OR AISI316L.
Finish : Semi-bright.
Other steel parts : AISI 304.
Rubber gardes : Silicon rubber, EPDM or VITON.

Ordering

Please state the following when odering:
- Valve type.
- Valve size.
- Connections. if not welding ends.
- Materials : AISI304 or AISI 316L.
- Rubber garde : EPDM, Silicone, or Viton
- Type of handle, if required.

Specification

(LONG)Inch Size Clamp Butterfly Valves

Size	ID mm	OD mm	L mm	H mm
1.0"	22.1	50.5	90	61
1.5"	34.8	50.5	90	64.3
2.0"	47.5	64	95	74.3
2.5"	60.2	77.5	97	77.6
3.0"	72.9	91	105	84.8
4.0"	97.6	119	105	101.6
6.0"	146.4	166.8	143	133.5

(SHORT)Inch Size Clamp Butterfly Valves

Size	ID mm	OD mm	L mm	H mm
1.0"	22.1	50.5	60	61
1.5"	34.8	50.5	60	64.3
2.0"	47.5	64	60	74.3
2.5"	60.2	77.5	60	77.6
3.0"	72.9	91	60	84.8

[Go to Top]

22.DIN Male Butterfly Valves

DIN Male Butterfly Valves

Technical Date

Max. product pressure : 10bar
Min. product pressure : Full vacuum.
Temperature range : -10° to +95°C

Materials

Product wetted steel parts : AISI304 OR AISI316L.
Finish : Semi-bright.
Other steel parts : AISI 304.
Rubber gardes : Silicon rubber, EPDM or VITON.

Ordering

Please state the following when odering:
- Valve type.
- Valve size.
- Connections. if not welding ends.
- Materials : AISI304 or AISI 316L.
- Rubber garde : EPDM, Silicone, or Viton
- Type of handle, if required.

Specification

DIN Male Butterfly Valves

Size	ID mm	OD mm	L mm	H mm
DN28	25	RD52x1/6	68	61
DN34	31	RD58x1/6	76	64.3
DN40	37	RD65x1/6	76	74.3
DN52	49	RD78x1/6	80	77.6
DN70	66	RD95x1/6	82	84.8
DN85	81	RD110x1/4	84	91.6
DN104	100	RD130x1/4	100	101.6

[Go to Top]

23.SMS Male Butterfly Valves

SMS Male Butterfly Valves

Technical Date

Max. product pressure : 10bar
Min. product pressure : Full vacuum.
Temperature range : -10° to +95°C

Materials

Product wetted steel parts : AISI304 OR AISI316L.
Finish : Semi-bright.
Other steel parts : AISI 304.
Rubber gardes : Silicon rubber, EPDM or VITON.

Ordering

Please state the following when odering:
- Valve type.
- Valve size.
- Connections. if not welding ends.
- Materials : AISI304 or AISI 316L.
- Rubber garde : EPDM, Silicone, or Viton
- Type of handle, if required.

Specification

SMS Male Butterfly Valves

Size	ID mm	OD mm	L mm	H mm
DN25	22.5	RD40x1/6	68	61
DN38	35.4	RD60x1/6	76	64.3
DN51	48	RD70x1/6	80	74.3
DN63	60.2	RD85x1/6	80	77.6
DN76	72.1	RD98x1/6	82	84.8
DN104	100	RD125x1/4	100	101.6

[Go to Top]

24.IDF Male Butterfly Valves

IDF Male Butterfly Valves

Technical Date

Max. product pressure : 10bar
Min. product pressure : Full vacuum.
Temperature range : -10° to +95°C

Materials

Product wetted steel parts : AISI304 OR AISI316L.
Finish : Semi-bright.
Other steel parts : AISI 304.
Rubber gardes : Silicon rubber, EPDM or VITON.

Ordering

Please state the following when odering:
- Valve type.
- Valve size.
- Connections. if not welding ends.
- Materials : AISI304 or AISI 316L.
- Rubber garde : EPDM, Silicone, or Viton
- Type of handle, if required.

Specification

IDF Male Butterfly Valves

Size	ID mm	OD mm	L mm	H mm
1"	22.1	37.13*8TPI ACME	80	61
1-1/2"	34.9	50.65*8TPI ACME	80	64.3
2"	47.6	64.16*8TPI ACME	80	74.3
2-1/2"	60.3	77.76*8TPI ACME	80	77.6
3"	72.9	91.19*8TPI ACME	80	84.8
4"	97.6	125.9*6TPI ACME	100	101.6